Help! My Irrigation System Rain Sensor Isn’t Working.
As a landscape maintenance contractor we receive more questions regarding irrigation than all of our other services combined. This is likely because the irrigation system is the most mysterious part of the landscape, after all, it’s invisible most of the time. This is the first post in a series where we will try to uncover some irrigation mysteries. We are going to start by answering a commonly asked question about rain sensors.
A rain sensor is connected to the irrigation system controller (sometimes called a clock) and its purpose is to shut the irrigation system down when a predetermined amount of rain has fallen. Rain sensors have existed for many years, but their use has been increasingly legislated over the past 10 years. Legislation has brought us to the point where currently in Minnesota it is state law that every landscape irrigation system must include a rain sensor.
103G.298 LANDSCAPE IRRIGATION SYSTEMS.
All automatically operated landscape irrigation systems shall have furnished and installed technology that inhibits or interrupts operation of the landscape irrigation system during periods of sufficient moisture. The technology must be adjustable either by the end user or the professional practitioner of landscape irrigation services.
Rain Sensor Photo Courtesy of Rain Bird
Although simple and effective, the rain sensor yields one of the most common irrigation related questions we receive. The question usually goes something like this: “A rain shower came through in the evening and my irrigation system still ran overnight. Can you check my rain sensor, because it must not be working?” Although it is possible for a rain sensor to malfunction, it is not what is typically going on during these events. Most of the rain sensors that we manage at Horticulture Services are set to shut down after ¼ inch of rain has fallen. Typically, a brief shower of rain like the one that this individual described in their question does not reach ¼ inch, and as a result the system does not shut down for that night’s watering cycle. Although we could make it more sensitive, we don’t want to create a situation where the turf is under-watered because quite often short rain showers don’t produce enough rain to replace the typical irrigation cycle. So the next time you hear your irrigation system turn on following a rain shower, you’ll know that you just may not have reached that ¼ inch of rain.
By: Jeff Wilson, General Manager